ODQA RENEWABLE ENERGY TECHNOLOGIES

Why Australia Leads in Solar Thermal Heat for Heavy Industry

Solar resource. Industrial need. Carbon pressure. The case is already made.

INDEX

Australia produces more iron ore than anywhere else on earth. It is the world’s second-largest producer of gold, a leading supplier of copper, nickel, lithium, and alumina, and home to some of the most energy-intensive mineral processing operations on the planet. Most of those operations run on diesel, gas, or LNG — fuels that are expensive to transport to remote sites, exposed to volatile international pricing, and, under Australia’s Safeguard
Mechanism, subject to declining emissions limits that tighten every year.

At the same time, the regions where the bulk of Australia’s mining and minerals processing takes place — the Pilbara and Goldfields of Western Australia, the outback of South Australia and Queensland, the Northern
Territory — sit beneath some of the most intense direct sunlight anywhere in the world.

This is not a coincidence that needs a complex explanation. Australia is one of the best-positioned countries on earth for Concentrated Solar Thermal (CST) industrial heat, and the mining and minerals processing sector is the
natural first market. The solar resource, the industrial need, and the policy pressure all point in the same direction.

This article sets out why.

Concentrated solar thermal requires Direct Normal Irradiance (DNI) — the intensity of direct sunlight falling on a surface perpendicular to the sun’s rays. The minimum threshold for viable CST is generally around 1850 kWh/m2/y being used in pre-feasibility. Below that, the economics become difficult. Above it, they improve steadily with every additional unit of solar resource.

Australia’s mining heartlands consistently exceed this threshold by a significant margin. Research published in the Journal of Solar Energy reports average DNI levels of 2,200-2,800 kWh/m²/year across Northern Territory mine regions. Global Solar Atlas data for Western Australia’s interior records DNI values approaching 2,900 kWh/m²/year in the most productive areas — among the highest recorded anywhere outside the Arabian Peninsula and the Atacama Desert.

Spain's solar belt, which built the world's first large-scale commercial CSP industry, operates with DNI levels of around 2,000-2,100 kWh/m²/year. Australia's best mining regions receive 30-40% more direct solar energy per year than the benchmark for commercial viability. That is not a marginal advantage. It directly reduces the levelised cost of heat from a solar thermal system, because the same capital investment delivers materially more output.

Australia heat map charts for climate/temperature metrics

The geographic alignment is key. The Pilbara — home to iron ore, gold, and lithium processing at scale — sits between approximately 20°S and 25°S latitude, in an arid, low-cloud zone that maximises DNI consistency across the year. South Australia’s Olympic Dam, the gold mines of the Goldfields, and the mineral processing operations of Queensland’s outback are all located within high-DNI corridors. The solar resource is not notional. It is directly co-located with the industries that need it most.

Australia heat map charts for solar resource assessment

Australia’s mining and minerals processing sector is one of the most heat-intensive in the world. The processes involved in ore drying, roasting, calcination, smelting, and materials finishing all require sustained hightemperature heat — and most of it currently comes from burning fossil fuels.

The energy challenge is compounded by geography. Many of Australia’s most significant mining operations are located in remote regions without access to the national gas grid. Fuel arrives by road or pipeline, at significant cost and logistical complexity. Remote and regional industrial gas and diesel prices in Western Australia, the Northern Territory, and outback Queensland consistently run above east-coast contract prices — and above international benchmarks — because of transport and supply chain costs.

Solar PV has made strong inroads into the electricity portion of remote mine loads over the past five years, with projects at sites including Rio Tinto’s Pilbara operations, BHP’s Nickel West, and AngloGold Ashanti’s Tropicana mine all incorporating solar PV and battery storage alongside existing gas generation. But electricity is only part of the energy picture.

The heat used to dry ores, calcine alumina, roast concentrates, and process minerals is a separate and larger challenge — and solar PV does not solve it directly. Converting solar electricity back into industrial heat at 400°C, 600°C, or 800°C introduces conversion losses and cost that CST avoids entirely.

The temperature match is particularly strong for several of Australia’s most significant processing applications:

  • Bauxite calcination (alumina production): sustained heat around 900-1,000°C
  • Ore drying (iron ore, copper, nickel concentrates): 300-600°C
  • Lime production (gold processing): above 900°C
  • Mineral roasting and calcination (various): 400-800°C

These are the temperature ranges that Odqa’s air-based CST system is designed to deliver — 800°C in commercial operation today, with the development pathway extending to 1,000°C and beyond.

Australia’s Safeguard Mechanism has moved from a framework that large emitters could largely manage through offsets to one that imposes real, tightening pressure on industrial emissions.

Since its reform in July 2023, the Mechanism applies to approximately 219-220 facilities emitting more than 100,000 tonnes of CO2-equivalent per year. These facilities span coal mining, metal ore mining, oil and gas extraction, and manufacturing. Their emissions baselines decline at 4.9% per year, and facilities that exceed their baseline must surrender Australian Carbon Credit Units (ACCUs) or Safeguard Mechanism Credits (SMCs) to cover the excess.

The carbon price signal is now material. The Safeguard Mechanism default prescribed unit price for 2024-25 was AUD 36.05, with the year-to-date 2025-26 figure running at AUD 36.82, according to the Australian Government’s Department of Climate Change, Energy, the Environment and Water. Preliminary data for 2024-25 showed a 48.9% increase in total exceedance across the scheme — meaning more facilities are running above their baselines, and compliance costs are rising.

For a large mining or processing facility with significant process heat emissions, every tonne of CO2 from burning gas or diesel for industrial heat is a tonne against a declining baseline. As baselines fall and carbon prices rise, the cost of continuing to burn fossil fuels for heat increases predictably. The cost of switching to solar thermal does not.

This creates a structural incentive that improves the economics of CST over time rather than degrading them. An operation that locks in solar heat at a known capital cost is, in effect, hedging against both fuel price volatility and carbon cost escalation simultaneously.

It is worth addressing a reasonable question directly: Australia has invested heavily in solar PV, and many mining operations now incorporate it. If solar PV is already on-site, why is CST needed?

The answer lies in what solar PV produces and what industrial heat processes require.

Solar PV produces electricity. It does so efficiently and at increasingly low cost. For the electricity-consuming portions of a mine — conveyors, ventilation, pumping, lighting, processing equipment — solar PV and battery storage is an excellent solution, and the industry has adopted it accordingly.

But the heat used to dry, roast, calcine, and smelt is not electricity. Converting solar electricity into industrial heat at 600°C or 800°C means running electric resistance heaters or plasma systems at temperatures where efficiency losses are significant and equipment costs are high. Above 400°C, electrification of heat becomes costly and technically challenging. Above 600°C, it is not a practical commercial solution at scale with current technology.

CST produces heat directly. Sunlight is concentrated, air is heated to 800°C, and that heat flows directly into the industrial process. No conversion step. No efficiency penalty. For the heat-intensive portions of Australian mining and minerals processing, CST is the technology that matches both the resource and the need.

The case for CST in Australian mining is strongest where solar resource, industrial heat demand, and carbon pressure are present simultaneously. In several of Australia’s most significant mining and processing regions, this alignment is already clear.

The Pilbara, Western Australia

The Pilbara hosts the majority of Australia’s iron ore production, along with gold, lithium, and manganese operations. DNI levels across the region regularly exceed 2,400-2,600 kWh/m²/year. Operations are large, continuous, and heat-intensive. Many are off-grid or partially grid-connected, making fuel supply chains a material cost. Multiple operators have existing renewable energy commitments and are actively seeking Scope 1 reduction pathways under the Safeguard Mechanism.

The Goldfields and Mid West, Western Australia

Gold, nickel, and lithium processing operations — including the gold refineries of Kalgoorlie and the nickel processing plants of the eastern Goldfields — are heat-intensive, remote, and increasingly exposed to carbon compliance obligations. DNI levels are consistently high across the region.

South Australia

Olympic Dam — one of the world’s largest uranium, copper, and gold deposits — along with mineral sands and steel-related processing operations, sits in a region with DNI levels consistently above 2,200 kWh/m²/year. The state government has a strong renewable energy mandate, and the Safeguard Mechanism applies to the largest facilities.

Outback and Northern Queensland

Coal and copper mining, mineral processing, and significant agricultural drying operations across inland Queensland operate in corridors with DNI levels of 2,200-2,500 kWh/m²/year. Gas supply to remote Queensland sites involves cost and logistics that strengthen the economics of on-site solar heat.

A credible case for CST in Australia needs to acknowledge what it cannot do today, alongside what it can.

CST requires land.
A solar tower system with a heliostat field requires a meaningful footprint. For operations in open, land-rich locations — which describes most of the Pilbara, Goldfields, and outback processing sites — this is rarely a constraint. For compact industrial parks, it may be.

CST requires direct sunlight.
Thermal storage handles intermittency well, and Australia’s high-DNI regions have relatively few cloud days. But operations requiring absolute continuous heat without any dependence on a backup fuel input will need to design for that specifically, which affects system sizing and cost.

CST at commercial scale for industrial heat is still early-stage.
Odqa’s technology is at NASA Technology Readiness (TRL) Level 6, with industrial field trials demonstrating 800°C and real-world proof points including solar aluminium melting and phosphate drying. The PSA demonstration in Spain is the primary reference case. Australia represents the next step in commercialisation, not a mature market.

This means early adopters in Australia will be working with Odqa as partners in a genuine development process — with the advantage of being first to secure technology access and shape system design for their specific application, but also accepting the reality of being among the first movers.

For operations that fit the profile — high DNI, heat-intensive processes above 300°C, Safeguard Mechanism exposure, and a genuine decarbonisation mandate — the appropriate next step is a feasibility assessment.

This involves a solar resource analysis using long-term meteorological data for the specific site, a process heat audit to characterise demand by temperature and time of day, system sizing and configuration modelling, and an economic analysis comparing the levelised cost of solar heat against current fuel costs and carbon obligations. The output is a site-specific answer to whether the business case works.

Australia’s combination of world-class solar resources, heat-intensive mining and minerals operations, and tightening carbon policy under the Safeguard Mechanism makes it one of the most compelling markets for CST industrial heat on earth. The question is not whether CST will play a role in Australian industrial decarbonisation. It is which operations will move first.

  • Australia’s mining heartlands — the Pilbara, Goldfields, outback South Australia and Queensland — have DNI levels of 2,200-2,900 kWh/m²/year, among the best in the world for CST.
  • Mining and minerals processing is deeply heat-intensive, with core processes including ore drying, calcination, roasting, and lime production operating at 300-1,000°C.
  • Solar PV addresses the electricity portion of mine energy demand well. It does not address the heat portion directly, and electrification of heat above 400°C is costly and technically constrained.
  • Australia’s Safeguard Mechanism imposes declining emissions baselines on approximately 220 large facilities at a 4.9% annual decline rate, with carbon prices running around AUD 36-37 per tonne. Mining and metals processing are among the most exposed sectors.
  • Exceptional solar resource, heat-intensive operations, expensive remote-site fuel supply, and carbon compliance pressure create a structurally strong case for CST industrial heat in Australia.
  • A feasibility assessment is the appropriate first step for operations that fit the profile.