Concentrated Solar Thermal Guide for Industrial Decarbonisation

INDEX

Heat accounts for more than half of global industrial energy demand, and the vast majority of it still comes from burning fossil fuels. Gas, coal, and diesel fire the kilns, dryers, and reactors that keep the world’s most energy-intensive industries running. Decarbonising that heat is one of the defining industrial challenges of this decade.

Concentrated solar thermal (CST) is one of the most compelling answers. Unlike solar photovoltaics (PV), which produce electricity, CST concentrates sunlight to generate heat directly, at temperatures high enough to replace fossil fuels in demanding industrial processes, without the inefficiency of converting electricity back to heat or connecting remote sites to a congested transmission grid.

This guide covers everything you need to know: what CST and Concentrated Solar Power CSP are, how they work, the main types of plants, where they operate globally, how they compare to photovoltaics, and how a new generation of air-based, rock-storage CST systems is making 24/7 industrial heat a commercial reality today.

Concentrated solar is a technology that uses mirrors or lenses to focus sunlight onto a small area, a receiver, where it is converted into heat. That heat can then be delivered directly to an industrial process (CST), stored for later use, or passed through a turbine to generate electricity (CSP).

The core distinction between CST and solar photovoltaics is fundamental: CST produces heat; PV produces electricity. For industries that need heat, and most of the world’s energy-intensive industries do, CST is the more direct and efficient solution. There is no conversion step, no efficiency penalty from turning electricity back into thermal energy.

CSP has been commercially deployed since the 1980s. The first utility-scale plants were built in California, and Spain later became the world leader in installed capacity. Today, CSP is operating or under construction across the Middle East, North Africa, South Africa, China, and Australia.

A new generation of systems is now targeting industrial heat directly (CST), rather than electricity generation (CSP), building upon the decades of experience and IP in the CSP industry.

The operating principle is straightforward. A solar field, an array of mirrors or lenses, concentrates direct sunlight onto a receiver. The receiver absorbs that concentrated energy and transfers it to a heat transfer medium, which carries the heat to where it is needed: a thermal storage system, an industrial process, or a turbine.

The critical solar resource for CST and CSP is Direct Normal Irradiance (DNI), the intensity of sunlight falling on a surface perpendicular to the sun’s rays. Unlike photovoltaics, which can use diffuse light on overcast days, CST and CSP require direct sunlight. This is why they perform best in regions with consistently high DNI: the Middle East, North Africa, southern Europe, parts of Australia, and the US Sun Belt.

The temperature achievable depends on the concentration ratio, how much sunlight is focused per unit area of the receiver. Parabolic troughs achieve moderate concentrations and temperatures of 300–400°C. Solar towers achieve much higher concentration ratios and can reach temperatures from 500°C to well above 1,000°C, depending on the receiver design and heat transfer medium used.

Thermal energy storage (TES) is what makes CST and CSP dispatchable. By storing heat generated during peak solar hours, in molten salt, solid rock, or other media, a plant can continue delivering heat after the sun has set or during cloud cover. This is a significant advantage over solar PV, which requires electrochemical batteries for storage and cannot deliver heat directly at all.

Parabolic Trough

Parabolic trough systems use long, curved mirror troughs to focus sunlight onto a receiver tube running along the focal line. A heat transfer fluid, typically synthetic thermal oil or steam, flows through the tube, absorbing heat as it goes. This is the most widely deployed commercial CSP technology in the world, forming the backbone of utility-scale plants in Spain, the United States, and the UAE.

Parabolic troughs typically operate in the 300–400°C range, which suits electricity generation via a steam cycle and a range of lower-temperature industrial processes. They are well understood, with decades of operational data, but their temperature ceiling limits their applicability to higher-temperature industrial heat.

Linear Fresnel Reflector

Linear Fresnel systems use a series of flat or slightly curved mirrors arranged in rows to reflect sunlight upward onto a fixed receiver mounted overhead. The design is simpler and less expensive to construct than parabolic troughs, and the compact, low-profile configuration is well suited to sites where land or wind loading is a constraint.

Operating temperatures typically range from 150–300°C, making linear Fresnel well suited to low- and medium-temperature industrial process heat: drying, pasteurisation, sterilisation, and similar applications. Storage integration is more limited than with tower systems.

Solar Power Tower (Central Receiver)

Solar power tower systems use a large field of individually controlled mirrors, heliostats, that each track the sun and reflect sunlight onto a receiver at the top of a central tower. The concentrated energy at the receiver is far greater than in trough or Fresnel systems, enabling much higher temperatures: from 500°C in conventional molten salt designs to well above 1,000°C in advanced air-based systems.

Most commercial tower plants use molten salt as both the heat transfer medium and storage medium, supporting electricity generation (CSP) via a steam turbine. A newer generation of tower systems uses air as the heat transfer medium and solid rock for thermal storage, which is better suited to direct industrial heat delivery (CST) at very high temperatures, and avoids the freeze-risk and corrosion issues inherent in molten salt systems.

Parabolic Dish / Stirling Engine

Parabolic dish systems use a single dish-shaped mirror array to concentrate sunlight onto a small receiver at the focal point. They achieve the highest concentration ratios of any CSP technology, and temperatures can reach 600–1,000°C. Most dish systems are coupled with a Stirling engine at the focal point, converting heat directly to electricity.

Dish systems are modular and suited to remote or off-grid electricity generation, but commercial deployment has remained limited. They are not the primary technology for large-scale industrial heat applications.

TechnologyTemp RangeMaturityStorageBest Application
Parabolic Trough300-400°CVery matureOil/steamUtility power, medium-temp heat
Linear Fresnel150-300°CMatureLimitedLow-temp industrial heat
Solar Power Tower500-1,200°C+Mature (utility) / Growing (industrial)Molten salt or rockHigh-temp industrial heat, utility power
Parabolic Dish600-1,000°CEarly commercialLimitedOff-grid, modular electricity

Our CST system is a solar power tower purpose-built for industrial heat delivery. Rather than generating electricity via a steam cycle, it delivers high-temperature heat directly into industrial processes, continuously, at the temperatures those processes actually require.

Four components work in unison to make this possible: a computer-guided heliostat field, a rotating air-based receiver, a rock-based thermal storage unit, and direct integration with industrial equipment. Each is designed with the industrial operator in mind.

01 Solar Concentration: The Heliostat Field

A field of computer-guided heliostats (mirrors) continuously tracks the sun throughout the day. Each mirror reflects sunlight onto a single focal point at the top of the central tower. Computer control maximises concentration accuracy across changing sun angles, seasons, and weather conditions. The result is an intense, controllable beam of concentrated solar energy delivered to the receiver at the tower’s apex.

02 Heat Generation: The Rotating Air-Based Receiver

At the top of the tower, our rotating air-based solar receiver absorbs the concentrated sunlight and heats air to 800°C in commercial operation today. Laboratory testing has proven 1,200°C, a significant development frontier that opens up a much wider range of industrial applications. Crucially, air is the heat transfer medium: no liquid, no freeze risk, no corrosion, and no complex fluid management systems.

03 Thermal Storage: High-Density Rock

Superheated air flows into a thermal energy storage unit packed with high-density rock material. The rock absorbs and holds the heat, releasing it on demand, during night-time operations, overcast periods, or peak process demand. There is no molten salt, no freeze risk, no corrosive fluid, and no requirement to keep the storage system continuously heated when the plant is offline. Rock storage is simpler, more robust, and lower maintenance than liquid-based alternatives.

04 Industrial Deployment: Direct Heat to Process

Stored or real-time heat is delivered directly into industrial systems: rotary dryers, kilns, calciners, and similar equipment. The system replaces fossil fuel burners without major infrastructure changes to existing plant. Heat is delivered at the temperature and flow rate the process requires, on the schedule the operation demands. This is 24/7 high-temperature solar heat, matched to industrial realities, not grid optimisation.

The result is 24/7 high-temperature solar heat delivered directly into industrial processes: no electricity conversion, no molten salt, no fossil fuel dependency.

Molten salt is the dominant thermal storage medium in utility-scale CSP power plants globally, and it has served those plants well. For industrial heat applications, however, it carries meaningful constraints that make it a poor fit.

Molten salt solidifies at around 220°C. Below that temperature, it becomes solid, which means any plant using molten salt must continuously consume energy to keep the storage system liquid through extensive trace heating of pipework, even when the plant is not generating heat. In an industrial context, this parasitic load adds cost and complexity that a simpler heat transfer fluid like air avoids entirely.

Molten salt is also corrosive to pipework, pumps, valves, and heat exchangers. Managing a large-scale molten salt system requires specialised materials, rigorous maintenance, and careful operational procedures. The supply chain and handling requirements add project risk, particularly in emerging markets.

Our rock-based packed-bed storage uses high-density solid materials, charged by superheated air. There is nothing to freeze, nothing to corrode, and minimal maintenance to the storage system between operational periods. The materials are widely available, robust over decades of thermal cycling, and well understood from related industrial applications.

For industrial operators whose primary goal is replacing fossil fuel heat rather than generating electricity, rock-based storage is the more practical and operationally straightforward solution. It is also a better thermal match for direct heat delivery: the system charges and discharges at the temperatures the process requires, without the intermediate steam-cycle step that molten salt plants typically use.

The comparison between CST and solar PV is frequently misframed. They are not competing technologies for the same application, as they produce fundamentally different outputs. Understanding that distinction is the starting point for any useful comparison.

The Fundamental Difference

Solar photovoltaics convert sunlight into electricity via the photovoltaic effect. That electricity can then be used to power equipment, charge batteries, or, if heat is the goal, drive an electric heater or heat pump. CST, by contrast, converts sunlight directly into heat, which can be delivered to a process, stored thermally, or, in the case of CSP, passed through a turbine to generate electricity.

For an industrial operator whose process requires heat at 400°C or above, choosing PV means adding an extra conversion step: sunlight to electricity, then electricity back to heat. Each conversion introduces losses. CST removes that step entirely. Heat goes directly from the sun to the process, at the temperature required.

This is not a marginal efficiency difference in high-temperature applications. It is a structural one. Electric resistance heating at 800°C is technically possible but energetically expensive. CST achieves it directly.

Head-to-Head Comparison

FactorConventional CSPSolar PVOur Air-Based CST
Primary outputHeat or electricityElectricityHeat (direct to process)
Temperature capabilityUp to ~600°C (molten salt)N/A800°C today / 1,200°C in development
Storage mediumMolten salt, batteriesBatteriesRock: no freeze risk, no corrosion
24/7 heat deliveryYes (with storage)Requires batteryYes
Industrial integrationLimitedLimitedDesigned for rotary dryers, kilns
DNI requirementHigh (>2,000 kWh/m²/yr)Moderate (diffuse viable)High (>2,000 kWh/m²/yr)
System complexityHigh (fluid management)LowModerate: air and rock
Carbon displacementHighHigh (for electricity)High (for direct heat)

When CST Is the Right Choice

CST is most valuable when heat is the primary requirement. Specifically, it is the right choice when:

  • The industrial process requires heat above 150°C, and particularly above 400°C, where electrification becomes costly and inefficient
  • The site has access to strong DNI resources, typically above 2,000 kWh/m²/year
  • Thermal storage is preferable or more cost-effective than electrochemical battery storage
  • The operation runs continuously, making 24/7 heat delivery a priority
  • The decarbonisation goal is to replace fossil fuel heat directly, without electrifying process equipment

When Solar PV Is the Right Choice

PV is the better choice when electricity is the required output, or when site conditions do not support CST:

  • Where electricity generation is the primary goal
  • In lower-DNI environments where diffuse light is the dominant solar resource
  • Where the industrial process is being electrified rather than directly heated
  • In applications where the economics of direct heat replacement do not yet stack up against the cost of PV-plus-battery

For energy-intensive industries in high-DNI regions, CST offers a combination of advantages that no other single technology matches.

Direct heat delivery at high temperature is the most fundamental benefit. By concentrating sunlight and delivering heat at 800°C or above, CST matches the temperature requirements of demanding industrial processes without the conversion losses inherent in an electricity-based approach. Heat goes from the sun to the process, at the grade required.

24/7 operation is possible because thermal storage decouples generation from delivery. Rock-based packed-bed storage enables continuous heat supply through night-time and overcast periods, allowing CST to function as a baseload industrial heat source rather than an intermittent solar supplement.

Operational simplicity is a significant advantage of air-based systems with rock storage. There are no liquid heat transfer fluids to manage, no freeze risk during outages, no corrosive media to contain, and no specialist fluid handling procedures. The result is lower maintenance overhead and reduced operational risk compared with molten salt systems.

Fossil fuel replacement without major infrastructure change is a practical benefit that matters to plant operators. The system integrates with existing rotary dryers, kilns, and calciners, delivering heat through the same interfaces that currently receive gas or other fuels. Operators avoid the capital cost and operational disruption of replacing process equipment.

Long asset life and fuel price hedging are financial benefits that compound over time. CST plants operate for 25–30 years or more, with low ongoing fuel costs. For operations currently exposed to gas, coal, or diesel price volatility, locking in solar heat at a predictable long-run cost is a meaningful hedge.

Carbon reduction follows directly from fossil fuel displacement. For operations under pressure to reduce Scope 1 emissions, whether from regulation, customer requirements, or voluntary commitments, CST delivers measurable, verifiable emission reductions at scale.

The relevant cost metric for industrial heat is the Levelised Cost of Heat (LCOH), the full lifecycle cost of delivering a unit of heat, expressed in £/MWh or equivalent. This is a more useful comparison than LCOE (Levelised Cost of Electricity) for operations that need heat rather than power.

Capital Expenditure for CST systems varies by technology type and configuration. Solar power tower systems with heliostat fields and thermal storage carry higher upfront costs than simpler parabolic trough installations, but they achieve higher temperatures and better storage integration. The heliostat field typically represents the largest single cost component, followed by the receiver, storage system, and balance of plant.

Rock-based thermal storage is generally lower in cost than molten salt systems of equivalent capacity. The materials are widely available, the infrastructure is simpler, and there are no fluid handling or freeze protection requirements that add cost at the system level.

Operational expenditure and yearly cost is primarily maintenance-driven. With no fuel input and relatively few moving parts in an air-and-rock system, ongoing operating costs are low compared with gas or diesel alternatives. Mirror cleaning and heliostat calibration are the main routine maintenance activities.

The economics of CST for industrial heat are most compelling in regions with high DNI and high fossil fuel costs. In MENA, Australia, and parts of Southern Europe, the combination of strong solar resources and elevated gas prices, particularly since 2022, has significantly improved the competitiveness of CST relative to conventional fuels.

Carbon pricing, green procurement requirements, and government incentives for industrial decarbonisation further improve the business case in most target markets. Project finance structures, including Power Purchase Agreement-style Heat Purchase Agreements or Heat as a Service (HaaS) can reduce the upfront burden on industrial operators and align payment with heat delivery.

CST and CSP are global technologies, but they are not evenly distributed. Their dependence on high DNI means commercial deployment is concentrated in a relatively small number of sun-rich regions.

Spain was the world leader in CSP installed capacity for many years, driven by favourable feed-in tariffs in the 2000s. The country hosts dozens of parabolic trough and tower plants, primarily generating electricity for the grid. While new development has slowed following policy changes, Spain remains the most mature CSP market in Europe and a significant reference point for the technology’s commercial track record.

The United States, particularly the Mojave Desert and the US South-West, was home to the world’s first commercial CSP plants and continues to host significant capacity.

Morocco has emerged as a major CSP developer, with the Noor complex near Ouarzazate representing one of the most ambitious CSP programmes globally. The project demonstrates that large-scale CSP is viable in emerging markets with strong solar resources and political commitment.

The Middle East and North Africa more broadly represent the highest-potential region for industrial CST. Annual DNI levels across Saudi Arabia, the UAE, Oman, Jordan, and neighbouring countries regularly exceed 2,000 kWh/m²/year, among the best in the world. The region’s large industrial base in mining, chemicals, and materials processing makes it a natural fit for high-temperature solar heat.

Australia offers exceptional DNI resources, particularly in Western Australia, South Australia, and Queensland. The country’s energy-intensive mining and minerals processing industries, concentrated in remote, high-sunshine locations, represent a compelling opportunity for CST industrial heat.

China has invested heavily in CSP in recent years, with multiple tower and trough plants operational in its north-western regions.

South Africa has also deployed CSP at scale through its Renewable Energy Independent Power Producer Programme.

CST is not a universal solution for every industrial process. It is most valuable where heat demand is high-temperature, continuous, and currently met by fossil fuels, and where the site has access to strong solar resources. The following sectors represent the strongest current fit.

Aluminium

Aluminium production and processing is one of the most energy-intensive industries in the world. High-temperature heat is required across multiple stages, from calcination of alumina to the drying and pre-heating of inputs. With significant aluminium capacity in the Middle East, Australia, and other high-DNI regions, CST industrial heat is a strong fit. Secondary aluminium (recycling) is also a key market: melting and holding furnaces, scrap preheating, dross processing, and the thermal treatment of coatings and contaminants before remelting all require sustained high-temperature heat that CST can supply directly. Secondary aluminium is far more prevalent in everyday life than most people realise — recycled aluminium ends up in drinks cans, car body panels, bicycle frames, window frames, foil packaging, and consumer electronics casings, making it one of the most widely recycled materials on the planet.

Ceramics

Ceramics manufacturing is one of the most heat-intensive industrial sectors, with firing and sintering processes that require sustained high temperatures over long periods. Tunnel kilns and periodic kilns used to produce tiles, sanitaryware, tableware, technical ceramics, and refractory products typically operate in the 900–1,400°C range, with precise temperature control critical to product quality. Pre-drying of formed ceramic bodies before firing also represents a significant, lower-temperature heat demand well suited to CST. Much of the world’s ceramics production is concentrated in Spain, Italy, North Africa, the Middle East, and Asia, with a significant share located in regions with strong DNI resources. For ceramics producers in high-solar locations, CST offers a direct path to displacing the gas that currently fires their kilns, at the temperatures their processes require.

Phosphate Processing

Phosphate mining and processing involves extensive drying, calcination, and thermal treatment of ores and intermediates. The processes are heat-intensive, often operating at temperatures well matched to CST output, and much of the world’s phosphate production is located in North Africa, a region with exceptional DNI resources.

Gypsum

Gypsum calcination, the process of driving off water to produce plaster and other products, is a direct application for CST-delivered heat. Operating temperatures align closely with what parabolic trough and tower systems can achieve, and gypsum production facilities in high-DNI regions are well positioned for solar heat integration.

Cement

Cement manufacturing is one of the largest industrial sources of carbon emissions globally. Pre-calcination and drying stages involve significant heat demand, and while the kiln itself operates at temperatures beyond current commercial CST reach, hybrid configurations that displace a meaningful fraction of fossil fuel use are viable today.

Mining and Minerals

Ore drying, roasting, and processing across the broader mining sector involve substantial heat demand. Many mining operations are located in remote, high-sunshine regions where grid electricity is expensive and fossil fuel supply chains are costly. CST industrial heat offers these operations a path to lower energy costs and reduced emissions simultaneously.

The answer depends on a small number of key criteria, and for the right combination of site, process, and organisation, the business case can be compelling.

The first question is solar resource. CST requires high Direct Normal Irradiance, generally above 2,000 kWh/m²/year. Sites in MENA, Australia, and southern Europe typically meet this threshold; sites in northern Europe typically do not. A solar resource assessment using long-term meteorological data is the first step in any feasibility process.

The second question is process temperature. CST delivers the most value where heat is required above 150°C, and particularly above 400°C. Below that threshold, heat pumps and other electrification technologies may compete more effectively. At 400°C and above, CST is one of very few solar options available.

The third question is current fuel cost and exposure. Operations spending heavily on gas, diesel, or coal, and particularly those exposed to volatile or rising fuel prices, will see the strongest economic case for solar heat. Carbon pricing adds a further dimension: operations facing a carbon cost on their Scope 1 emissions see a direct financial benefit from fossil fuel displacement.

Land availability matters too. A solar tower with heliostat field requires a meaningful land footprint, though less than an equivalent parabolic trough installation. For operations with adjacent land, or in regions where land is relatively abundant, this is rarely a constraint.

Finally, decarbonisation commitments, whether regulatory, customer-driven, or voluntary, are increasingly material to the investment case. For operations with net-zero or significant emissions reduction targets, CST industrial heat offers a credible, proven pathway to Scope 1 reduction at scale.

A feasibility assessment typically involves a solar resource analysis, a process heat audit to characterise demand by temperature and time of day, system sizing and configuration modelling, and an economic analysis comparing LCOH against current fuel costs under different scenarios. If you would like to explore whether CST is right for your operation, we would be glad to walk through the process with you.

What is the difference between concentrated solar thermal (CST) and solar Photovoltaics (PV)?

CST concentrates sunlight to generate heat; solar PV converts sunlight directly to electricity. For industries that need heat rather than electricity, CST is the more direct and efficient solution. There is no conversion step, and heat can be delivered at high temperatures that electrification cannot easily match.

What temperatures can CST achieve?

It depends on the technology. Parabolic troughs typically reach 300–400°C. Solar power tower systems using air-based receivers can reach 800°C in commercial operation today, with 1,200°C proven in the laboratory, opening up a wide range of high-temperature industrial applications.

Does CST work at night or on cloudy days?

Yes, when combined with thermal energy storage. Rock-based packed-bed storage holds heat generated during peak solar hours and releases it continuously, enabling genuine 24/7 industrial heat delivery regardless of real-time solar conditions.

Why use rock storage instead of molten salt?

Molten salt is the conventional storage medium for utility-scale CSP but solidifies below around 220°C, requiring continuous heating to prevent freezing, and adding corrosion risk and maintenance complexity. Rock-based storage uses solid high-density materials charged by superheated air. There is no freeze risk, no corrosive medium, and no requirement to keep the system continuously heated between operating periods. For direct industrial heat delivery, it is a more robust and operationally straightforward solution.

How much land does a CST plant require?

Land requirement depends on system capacity and site DNI. Solar tower systems with heliostat fields are more land-efficient per unit of output than parabolic trough installations. A feasibility assessment will determine the optimal configuration and land footprint for a given site and process heat demand.

What is the lifespan of a CST plant?

CST plants typically have an operational lifespan of 25–30 years or more, with low ongoing fuel costs and maintenance-driven OPEX. The long asset life is a key driver of the favourable economics relative to fossil fuel alternatives over a full project lifetime.

Which regions are best suited to CST?

Regions with Direct Normal Irradiance above 2,000 kWh/m²/year are the primary opportunity. This includes the Middle East and North Africa, Australia, the US Sun Belt, southern Europe (particularly Spain, Portugal, and southern Italy), South Africa, and parts of South America.

Can CST integrate with our existing industrial plant?

In most cases, yes. Air-based CST systems are designed to deliver heat into existing industrial equipment, rotary dryers, kilns, and similar, through interfaces that currently receive gas or other fuels, with minimal infrastructure changes. A process heat audit will confirm compatibility and identify the best integration approach for your specific plant configuration.

  • Concentrated solar thermal converts sunlight into heat: the right tool for industries that need heat, not electricity.
  • Solar power tower systems achieve the highest temperatures of any CST technology: 800°C commercially today, with 1,200°C in development.
  • Air-based receivers and rock thermal storage remove the operational constraints of molten salt, enabling simpler and more robust industrial heat delivery.
  • Rock-based thermal storage enables genuine 24/7 heat delivery, independent of real-time solar conditions.
  • CST is best suited to high-temperature, energy-intensive industries in high-DNI regions. MENA, Australia, and southern Europe lead the opportunity.
  • For industrial operators replacing fossil fuel heat, CST offers long asset life, fuel price hedging, and direct process integration with minimal infrastructure change.